Modern Ag Products Path Slayer is an extremely well-built, versatile, hydraulic direct drive brush cutter designed to take care of difficult mowing chores. The Path Slayer is a front-end loader mounted brush cutter designed to tackle jobs such as vertical road and hunting lane cutting. It is ideal for maintaining trails, slopes, lakes, retaining ponds, ditches, and plantation rows.
The Path Slayer is made for tractors only and is not meant for skid steer use. It is made by Modern Ag Products, so you know it is built to last.
Specifications
• Cutting Width – 44”
• Overall Width – 50”
• Overall Length – 47”
• Overall Height – 29”
• Cutting Height – 2”
• Cutting Positions – 11
• Hitch – SS Universal, JD 400 & 500 Pin series, Euro
• Hydraulic Flow – 7 – 21 GPM (Not designed for skid-steer use)
• Blade Carrier – Pan Stump Jumper
• Ouput Shaft Diameter – 2” Splined
• Cut Capacity – Up to 3”
• Blade Tip Speed – 17,500 ft./min @ 10 gpm
• Deck Thickness – 3/16” (7 gauge)
• Side Thickness – 3/16” (7 gauge)
• Rear Band Guard – Standard
• Minimum Required Tractor Weight – 3,250 lbs.
• Weight – 577 lbs.
• 11 cutting positions
• Heavy duty construction
• Hot dipped galvanized deck for long life
• Continuous welding – no skip welding
• Open front design
• Ability to cut from 0 degree to 90 degrees
• 44” Cutting width
• 2” Splined output shaft
• Covered by a 1-year residential manufacturing defect warranty
• 3/8”X3”X12” Hardened Steel Rotary Cutter Blades & Blade Bolts
• Heavy Duty Gearbox & Hydraulic gear pump
• Cut up to 3” vegetation
• Made for tractors only
Modern Ag Products Compact Path Slayer is an extremely well built, versatile, hydraulic direct drive brush cutter designed to take care of difficult mowing chores. The Compact Path Slayer is a front-end loader mounted brush cutter designed to tackle jobs such as vertical road and hunting lane cutting. It is ideal for maintaining trails, slopes, lakes, retaining ponds, ditches, and plantation rows.
The Compact Path Slayer is made for compact tractor lines and is not to be used on skid steers. It is made by Modern Ag Products, so you know it is built to last.
For greater flexibility, this unit can be combined with our HR30 (005-0030) for a completely closed hydraulic loop.
Specifications
Covered by a 1-year residential manufacturing defect warranty
• 3/8”X3”X12” Hardened Steel Rotary Cutter Blades & Blade Bolts
• Hot dipped galvanized deck for long life
• Continuous welding – no skip welding
• Heavy Duty Bearing Housing & Hydraulic Gear Pump
• Ability to cut from 0 degree to 90 degrees
• 32” Cutting width
• 2” Splined output shaft
• Heavy duty construction
• Cut up to 2” vegetation
• Multi cutting positions
• Open front design
• Weight: 390lbs
Modern Ag Products HR30 hydraulic reservoir system is designed for tractors that are not equipped with a hydraulic system large enough to operate equipment that requires continuous circulation of hydraulic fluid. The HR30 will increase your ability to operate many types of hydraulic equipment including hydraulic mowers, snow removal equipment, broom attachment, etc.
HR Specifications
• 30 Gal. Tank
• Inline Pressure Relief Valve
• 10 Micron Filter
• Easy Hook Up PTO Pump
• HD Tank Construction
• Cat. I & II QA Hitch
• Equipped With An Oil Level & Temp Indicator
• Flat Face Quick Connect Fittings
• Three Position Landing Gear
• Acts As A Rear Counterweight For
Lightweight Tractors